HOBBYMATE D6 Duo Pro - Charger Settings

Task Parameters
System Parameters
CH2 Calibrations
CH1 Calibrations
System Self-checking
Factory Settings
Charger settings
System Info
Back
Charger Settings
Operation and Setup
Long press the shuttle key in standby interface to make the system default menu pop up, and
the items are as follows:
Adjust Safety Timer, Max Capacity, End Current and Trickle Charge
Adjust Language, input power, input voltage and so on
Used for channel 1 data calibration
Used for channel 2 data calibration
Start charging Self-checking
Restore all parameters to factory settings(User calibration data cleanup)
Display system information、serial number
Exit system Settings
Task Parameters
System Parameters
CH1 Calibrations
CH2 Calibrations
System Self-checking
Factory Settings
System Info
Back
05
D6 Duo Pro AC/DC Dual Channel Smart Charger