EasyManua.ls Logo

HobbyPCB HARDROCK-50 - Introduction to Hardrock-500

Default Icon
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
[1]
1. INTRODUCTION
This assembly manual covers the Hardrock-500 HF Amplifier Support Package manufactured by HobbyPCB, LLC
The Hardrock-500 is an Amplifier Support Package and contains everything needed to support in operation of a RF
amplifier capable of operation in the 1.8 – 30 MHz band at power levels up to 500W.
To create a complete amplifier using the Hardrock-500, the builder must supply a suitable amplifier deck. HobbyPCB
engineers have extensively tested the Hardrock-500 with the RF Power Tools, AN-1819 amplifier board that uses a pair
of Microsemi VRF2933 LDMOS FETs and is capable of 400-500W output with 5 watts of drive.
ITEM SPECIFICATION
Manufacturer HobbyPCB, LLC.
Model Number Hardrock-500
LPF Bands 160, 80, 60, 40, 30, 20, 17, 15, 12, 10 meter Amateur Radio Bands
AC Power Input 90-260 Volts AC, 47-63Hz, 13A max. @ 115V, 6.5A max @ 230VAC
DC Power 57V Volts, 22 Amps maximum, 1250 watts
DC Output 13.5V, 2A max for powering transceiver
Cooling RF deck: 3 fans, 32CFM Power Supply : 1 Fan 26 CFM
In/Out Jacks Three UHF connectors; 1 radio, 2 antenna
Size 9” W by 7” H by 14.2” D
(229mm W by 178mm by 361mm)
(not including switches and connectors)
Weight 16.5 lbs/7.2 Kg under 18 lbs/8.2 Kg with ATU
Metering V
DD
: 0 – 60 Volts
I
DD
: 0 – 20 Amperes
Forward Power: 0 – 500 Watts
Reflected Power: 0 – 50 Watts
Drive Power: 0 – 10 Watts
Temperature: 0 – 70°C
VSWR: 1.0 – 9.9:1
Hardrock-500 features:
Completely self-contained - built-in power supply for 80-260 VAC
Light weight - 7.5 Kg (16.5 lbs.) including power supply
Dual color LCD touch screen displays for metering and operating controls
Full HF coverage of 160-10M amateur bands
Seamless integration with transceivers from HobbyPCB, Elecraft, Yaesu, Elad and Xiegu
Internal ATU and input attenuator for 100W transceivers (coming soon)
Arduino Mega controller - 100% open source firmware
Automatic protection for SWR, temperature, voltage, current and excessive drive
13.8V, 2A DC output to power QRP transceivers
USB control for unattended/remote operation