Need help?Do you have a question about the Hobbytech BXR.S2 KIT VERSION and is the answer not in the manual?
Detailed list of various screw types, sizes, and nylon lock nuts.
Warnings about speed, operating near traffic, people, and animals.
Step-by-step instructions for safe radio control operation and shutdown.
Instructions for assembling the front and rear differential gears.
Steps for assembling the slipper unit, including lubrication points.
Steps for installing the motor and guidance on gear selection.
Steps for assembling the front steering linkage and components.
Assembly of the front steering knuckles and upper suspension links.
Instructions for identifying and correctly tightening turnbuckles.
Final assembly of the entire steering system components.
Assembling the shock absorber towers for both front and rear.
Instructions for mounting the steering servo and related notes.
Detailed steps for assembling the front and rear shock absorbers.
General| Scale | 1/10 |
|---|---|
| Type | Buggy |
| Drivetrain | 4WD |
| Height | 140mm |
| ESC | Not included |
| Battery | Not included |
| Chassis | Aluminum |
| Drive System | Shaft |
| Tire Type | Off-road |
| Motor | Not included (KIT version) |
To Next Page
