Attach the straps to the pad eyes on each corner of
the crate. Install H-Crate in tankwell of kayak and
attach clips to available pad eyes. Tighten straps by
pulling the loose end of the strap.
5
4
To interlock the tabs in the bottom, turn crate right
side up and push the bottoms of the walls outward
until the tabs are interlocked.
To secure rods, pull bungie handle over reel handle
and secure in slot next to pad eye.
6 Customize your H-Crate! Here are a few ideas:
H-Rail Tackle Bin
Vertical Rod
Holder
For more tips, tricks and videos go to:
HobieFishing.com
H-Rail Ram Mounts
1” and 1.5” Ball
H-Rail Mounting
Plate
7