7
Running Transducer & Power Cable
9
With most fishfinders you will be able to get both cables to fit using the exist-
ing thru hull wire plug and appropriate rubber plug.
For certain fishfinders, like the Lowrance HDI models, you may want to install
an additional thru hull wire plug for running cables out of the kayak hull. If
this is the case you will need to drill a 1” diameter hole using a spade bit or
hole saw in the desired location that the wires will exit. We have included an
additional thru hull wire plug in this kit for this reason.
.
To Next Page
Loading...
Need help?
General