Hobie Kit III User Manual

6
Running Transducer & Power Cable
4
Locate the thru-hull
plug and unscrew the
nut on the inside of the
boat.
Thru-Hull Plugs
5
Remove the solid
rubber plug.
6
Choose the correct
plug for your wire size
and insert the wire by
opening the plug along
the slit.
7
Press the new plug
with the wire installed
into the plastic plug
making sure it fits
tightly.
8
Bolt the thru-hull wire
assembly to the hull
using the nut, and
making sure you have
the o-ring installed.
O-ring

Hobie Kit III Specifications

General

Brand	Hobie
Model	Kit III
Category	Fish Finder
Language	English