EasyManua.ls Logo

Hobot 198 - Remote Controller; LED Indication

Hobot 198
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Remote controller
The device can be remote controlled from the front and back sides.
Auto up then down Auto left then down Auto right then down
※ If you have to replace the battery, just pull down the battery cover.
LED indication
Situation
LED indication
1. Battery charging
Orange LED is ON
2. Battery charged
Green LED is ON
3. No electrical power
Red LED flashing
Repeated beeping sound
4. Hardware error
Red-LED flashing
Blue-LED flashing with “error number”
5. Friction factor check error at start-up.
Red-LED flashes once, Beep
6. Vacuum pressure too low
Red-LED flashes once, Beep
7. Air leakage while operating
Red-LED flashes once, Beep
Automatically move up then down
Automatically move left then down
Automatically move right then down
Manually move UP、DOWN、RIGHT、LEFT
Stop
Clean twice