8. CLEANING AND STORAGE
• Clean the appliance with a soft duster
or a dry cloth. Do not use any abrasive or
rough cleaners / detergents.
• Remove the dust accumulated inside the fan grill shroud by opening the fan
grill shroud and wiping its interior clean with a dry cloth. Warning: Ensure thatthe
fan is switched off from the supply mains before removing the gaurd.Reassemble
the grill shroud after cleaning.
• Never clean with a damp cloth. Never immerse the appliance in water.
• If you do not want to use the appliance for a long time, keep it in a dry and cool
place indoors.
Operation
1. Make sure that the mains outlet v
oltage matches the ratings on the
appliance nameplate.
2. Operate the control panel to choose the fan speed: 0 (
off), 1(low),
2 (medium), 3 (high).
3. Adjust the fan head tilt by pressing the tilt-gear shr
oud up or down.
4. Start the fan oscillation b
y depressing the oscillation lock (A).
5. Stop the fan oscillation by pulling up the oscillation lock (
A).
9. TROUBLESHOOTING
1. If you experience any pr
oblems when operating this appliance, return it to the seller. Do not
attempt to open any housing or other safety-sealed parts on your own.
2. Inspect the power cord for damage and wear
. If damaged, have the power cord replaced
by a qualied electrician. Do not operate the appliance with the power cord damaged!
A
3
2
1
Off
23