HOFFEN ASSC-H002 - Assembly Instructions; Appliance Operation

EN
[28]
BAGLESS VACUUM CLEANER
Assembly
• Inserttheexiblehose(E)intotheexiblehose’sentry(F)onthe
frontofthetank(H)untilaclicksoundisheard.
• Attach the telescope metallic tube(C)totheendofthehose(E).
• Adjust the length of the telescope tube(C)byslidingthebutton
forward(D)andpullingthebottomofthetelescope tube(C)to
thedesiredlength.Tosecurethetube(C)totheselectedlength,
releasethebutton(D)toitsoriginalposition.
• Selectthemostappropriateaccessory(AorR),dependingon
thetypeofsurfacetobecleaned,andattachittotheendofthe
extensiontube(C).
• It is advisable to use the accessories in cleaning the following
surfaces:
 Higheciencyoorbrush(A)-withdoublefunctiondueto
itsretractablebristles,isidealforcarpetsandhardoors;
 Nozzle with dual function(R)-withthebristles foldedback,
it becomes a nozzle ideal for cleaning cracks, corners and
hard to reach surfaces. With the bristles unfolded it becomes
ideal for cleaning the powder on various surfaces, such as
furniture, blinds and lamps.
• Make sure that the dust container (H) is properly tted and
attachedtothebodyoftheappliancebeforeuse.
Operation
Press the automatic cable rewinder button (L) to unroll the
supplycord(K)untiltheyellowindicatormarkoftheideallength
isdisplayed,andplugtheapplianceintoanoutletsocket.
Note: do not unroll the supply cord (L) beyond the red mark
thatindicatesthemaximumlength.Pullingthesupplycord(L)
beyondthatmarkmaycausedamagestotheappliance.
• Switchontheapplianceonon/obutton(J).
• Adjust the suction power on the suction power regulator valve
(S),locatedatthehandleofthehose(E).Itisrecommended
tokeepthevalve(S)openwhenvacuumingcurtains,toavoid
excessivesuction,andkeepitclosedwhenvacuuminghardoor.