EN
[40]
ELECTRIC BARBECUE 2 IN 1
Note: detail image of the control panel,
heating element (resistance) and power
cable (B) in contact with the tray (A).
Place the grid (E) by selecting one of the 2
height options available according to your
needs.
At the end of the assembly, the appliance
should be as shown in the gure on the
side.
Before rst use
• Place the appliance properly assembled on a at, stable and heat resistant
surface, keeping a minimum safe distance from walls or other objects.
• Unroll the power cord completely and plug the appliance into the outlet.
• Turn the thermostat (B1) to the maximum temperature. The operating
light (B2) comes on and remains on for as long as the appliance is
connected to the power supply.
• Wait about 10 minutes for all manufacturing residues to be burned. After
10 minutes, turn the thermostat (B1) to the “0” position (off), remove the
plug from the socket and let the appliance cool down.
• Clean the main body of the appliance with a clean, dry cloth or a slightly
damp cloth. Do not use aggressive cleaning agents to prevent damage to
the surface of the device.
To Next Page
Loading...