[32]
• To remove any manufacturing residues, wash all accessories (G, K, L, O,
PQ, R and S) with warm water and a mild detergent, and then dry them.
• To remove manufacturing residues from the system, put the appliance
into operation following the instructions described in the “Use” section,
not using coffee, or placing the handle (G) on the machine. As soon as
the water is completely drained, turn off the appliance using the on /
off button (N) and allow it to cool for 5 minutes. Repeat this procedure
for 2 more times.
• The appliance is ready for use.
Filling the water tank
• Make sure that the appliance is switched off on the on / off button (N)
and on the power supply.
• Lift the water tank cover (M), remove the tank (O) and ll it with 1.2
L of water, making sure that it does not exceed the maximum limit
indicated by the “max” mark on the tank (O). Place the tank (O) back on
the appliance and close the cover (M).
Preheating
• To make a quality cup of espresso, we recommend that you preheat
the appliance, the portalter (G), the lter that will be used and also the
cup so that the avour of the coffee is not affected by contact with cold
surfaces.
• Select the desired accessory:
• 1 Cup powder lter (Q);
• 2 Cups powder lter (R);
• Pod lter (S).
• Insert the selected empty lter into the portalter (G), that is, without
coffee in it.
• Make sure that the function selector button (D) is in the “Off” position.
• Align the portalter (G), with the handle facing left, with the hot water
outlet, in the “Insert” position and turn it counter-clockwise to “Lock”
position.
• Place the cup over the drip tray (K) so that it is centred with the water
/ coffee outlet.
• Connect the appliance to the electrical outlet and press the on / off
button (N). The power on indicator light (E) lights up immediately.
IM_Máquina de café Expresso HOFFEN food express ref. MCEU-H147.indd 32IM_Máquina de café Expresso HOFFEN food express ref. MCEU-H147.indd 32 27/09/22 19:2927/09/22 19:29
To Next Page
Loading...