33
4. To install the trimmer, perform the actions for
trimmer removal in reverse order.
7.4 Attachment installation/removal
a) Trimmer attachments for face and body (1, 2, 4,
6 mm), and for facial hair S, M, L
1. Make sure that the appropriate head is installed
on the device.
2. Switch off the device.
3. Caution! The device must be turned off.
4. Gently place the attachment on the head, star-
ting from the front part with the teeth, then press
down.
5. A characteristic “click” will be heard.
6. To remove the attachment for face and body
from the trimmer, gently lift the attachment up.
Attachment front
Attachment back
7.5 Use
Caution! It is not recommended to use the devi-
ce when taking a bath or shower, under running
water, or to immerse it in any liquids, despite its
IPX5 ingress protection class.
To Next Page
Loading...