34
Trimming and shaping face and body hair:
Use the face and body trimmer head.
1. Make sure that the trimmer is turned off. Install
the selected trimmer attachment for face and
body, depending on need.
2. Make sure that the head and attachment are
installed properly: see 7.3 Facial hair/ face and
body trimmer — installation and removal, and
7.4 Attachment installation/removal
3. Turn the trimmer on.
4. Position the trimmer head (with or without
attachment) on skin, always holding the device
at an angle of 45°. Slowly slide the device against
the direction of hair growth. You may slide the
device in both ways (frontwards and backwards).
Facial hair trimming and shaping
Use the face and facial hair trimmer
1. Make sure that the trimmer is turned off.
2. Make sure that the trimmer head is installed
properly: see 7.3 Facial hair/ face and body trim-
mer — installation and removal and 7.4 Attach-
ment installation/removal
3. Turn the trimmer on.
4. Start from the beard/moustache line edge, and
gently lower the trimmer blade onto the skin.
Apply movements towards the beard/moustache
To Next Page
Loading...