3
42
6. Take out the lter and clean any dirt off it. Never flush the lter under running
water. The lter cannot come into contact with water.
7. The dust container can be flushed under running water. Then it must be wiped
dry.
8.4 FILTER CLEANING
1. Follow the p. 8.3 Cleaning the dust container.
2. When the lter (17) is taken out, in can be purged e.g. with compressed air.
When the top lter (18) is taken out, it can be cleaned with a small brush or
flushed under running water.
3. After flushing, wait for the lter to dry.
8.5 CLEANING THE SENSORS
Regularly clean the IR window on the front of the device, and the floor detection
sensors (sensors, which prevent falling from e.g. the stairs) on the device bot-
tom.
Regularly clean the charging points on the device and the docking station.
To Next Page
Loading...
