Hoffman AutoLog AUTKL800BT - User Manual

THESE REMOTES ARE NOT PROGRAMMED!
STOP
REMOTE OPERATION
AUTKL800BT
8 channel system
3rd channel output
4th channel output
5th channel output
6th channel output
Anytime3
2
1
Button Function Condition
Anytime4
Anytime1+3
7th channel output Anytime1+2
Anytime2+4
8th channel output Anytime3+4
1.
Remote Transmitters*
*If your remotes look different than above, you may have an older kit (pre-2023).
Download instructions at InstructionsNow.com
KEYLESS ENTRY SYSTEM
TECH SUPPORT: 503.693.1918 WWW.AUTOLOC.COM
©2023 The Hoffman Group International Ltd Co. All rights reserved. AUTKL800BT 07/03/2023 Page 1 of 11
The above instructions are for reference only. THG is not responsible for any inaccuracies in the above instructions. THGI is also not responsible for any property damage or personal injuries resulting from the above
instructions. Installation by qualified automotive professionals is highly recommended.
Enable starter/ignition
kill and lock door
LOCK
Disable starter/ignition
kill and unlock door
UNLOCK
Starter/ignition
kill enabled
Starter/ignition
kill disabled
*
#
1
2
3
4
*
#
8
6
5
7
CH1 REMOTE DOOR LOCKING
a. Press button 1. The parking lights will
flash once. The starter/ignition kill
circuit will be enabled and the lock
output will pulse for 1 second.
b. LED will begin flashing slowly.
CH2 REMOTE DOOR UNLOCKING
a. Press button 2. The parking lights will
flash twice. The starter/ignition kill
circuit will be disabled and the unlock
output will pulse for 1 second.
b. LED will be off.
CH3 OUTPUT
Press button 3 to output channel 3
for 1 second.
CH4 OUTPUT
Press button 4 to output channel 4
for 1 second.
CH5 OUTPUT
Press button 1+3 to output channel 5
for 1 second.
CH6 OUTPUT
Press button 2+4 to output channel 6 for 1
second.
CH7 OUTPUT
Press button 1+2 to output channel 7 for 1
second.
CH8 OUTPUT
Press button 3+4 to output channel 8 for 1
second.
See page 2 for programming instructions

Hoffman AutoLog AUTKL800BT Specifications