Hoffman ELG-4 Assembly Instructions

©/TM
2023 UnityLab Corp. All rights reserved.
www.buyhoffmansteamnow.com
JEL Assembly Instructions
READ THIS FIRST
• Applies to Models JEL-1, JEL-2, JEL-3, JEL-4, JEL-6, ELG-4, ELG-4.2, ELG-5,
ELG-5.2, ELG-6, ELG-7.
• Some assembly is required before the unit can be used.
• Follow the assembly instructions given on this page.
• Other important instructions are listed in the manual that is supplied
with the unit. Read the manual for safety installation and operation
instructions.
ASSEMBLY INSTRUCTIONS
1. Install pressure gauge and pipe on top of generator.
2. Install nozzle in valve at top of generator where applicable
CAUTION
ITEMS 1 & 2 ARE SUBJECTED TO HIGH PRESSURE STEAM. MAKE SURE BOTH
ITEMS ARE TIGHTLY SCREWED INTO THE TOP OF THE GENERATOR.

Hoffman ELG-4 Specifications

General

Brand	Hoffman
Model	ELG-4
Category	Iron
Language	English