BINGO Evolution- Service and maintenance instructions
Content Page
1 Model identication & basic conguration
1.1 Model identication (label)_____________________________________________________ 4
1.2 Basic conguration __________________________________________________________ 4
2 Overview BINGO Evolution _____________________________________________________5-12
3 Common information ___________________________________________________________ 14
3.1 Preface __________________________________________________________________ 14
3.2 Application________________________________________________________________ 14
3.3 Declaration of conformity_____________________________________________________ 14
3.4 Terms of warranty __________________________________________________________ 14
3.5 Customer service __________________________________________________________ 15
3.6 Service and repairs _________________________________________________________ 15
3.7 Packing and shipping instructions ______________________________________________ 15
4 Safety Instructions _____________________________________________________________ 16
3.1 Meaning of symbols ________________________________________________________ 16
3.2 Common safety instructions __________________________________________________ 16
5 Required tools and maintenance schedule _________________________________________ 17
5.1 Required tools _____________________________________________________________ 17
5.2 Maintenance schedule ____________________________________________________18-19
6 Seat settings __________________________________________________________________ 20
6.1 Seat height + lower leg length_________________________________________________ 20
6.2 Footrest angle _____________________________________________________________ 21
6.3 Seat width ________________________________________________________________ 21
6.4 Seat depth________________________________________________________________ 22
6.5 Back height _____________________________________________________________22-23
6.6 Thorax width ____________________________________________________________23-24
6.7 Headrest width ____________________________________________________________ 24
6.8 Seat angle adjustment_______________________________________________________ 25
6.9 Recline __________________________________________________________________ 25
7 Maintenance schedule __________________________________________________________ 26
7.1 Chassis ________________________________________________________________26-27
7.2 Front strut ________________________________________________________________ 27
7.3 Rear frame _______________________________________________________________ 27
7.4 Rear axle_________________________________________________________________ 27
7.5 Push bar _________________________________________________________________ 28
7.6 Seat bearing ______________________________________________________________ 28
7.7 Front wheels ______________________________________________________________ 29
7.8 Rear wheels ______________________________________________________________ 30
7.9 Accessory bag_____________________________________________________________ 30
7.10 Braking system __________________________________________________________30-31
To Next Page
