EasyManua.ls Logo

Hogtunes REV 225-AA User Manual

Hogtunes REV 225-AA
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
rev 225-AA
225 Watt 2-Channel Amplifier
installation Manual
rev 225-AA
225 Watt 2-Channel Amplifier
For Use on 1998-2013 model bikes
installation Manual
Question and Answer IconNeed help?

Do you have a question about the Hogtunes REV 225-AA and is the answer not in the manual?

Hogtunes REV 225-AA Specifications

General IconGeneral
BrandHogtunes
ModelREV 225-AA
CategoryMotorcycle Accessories
LanguageEnglish

Summary

Mounting Considerations and Adaptor Kits

Standard, EG Classic, Street Glide, Ultra: Single Amp Mounting

Mount the amplifier to the top of the radio using supplied adhesive. No adaptor is needed.

Standard, EG Classic, Street Glide, Ultra: Second Amp Mounting

Requires the "2CHSP" adaptor kit to mount the amplifier between the radio and brake side speaker.

Road Glide/Road Glide Ultra: Adaptor Kit Requirements

Two different RG adaptor kits are available depending on system configuration.

Road Glide: Single Amp or With NCA 450/40.4

Use the RG2CH-AA kit to mount the amplifier to the main studs attaching the inner fairing.

Road Glide: Second Amp Installation

Use the RG4CH-AA kit to mount the second amplifier to a plate attached to inner fairing studs.

Getting Started

Wiring the Amplifier

Final Installation Steps and Safety

Critical Steering Safety Check

Ensure wires do not impede steering by turning the front wheel to extremes.

Related product manuals