HOLDEN RC COLORADO 2010 - Changing a flat tyre

CHANGING A FLAT TYRE
Chapter 6
EMERGENCIES
6-5
4. Remove the jack and tools.
Single cab models:
The jack and tool bag are positioned
behind the right seat. To access, tilt the
back of the seat forward. Refer to Seats in
chapter 3 for seat tilt lever location.
To remove the jack, turn the pressure
release knob anticlockwise, to reduce its
length, so it can be lowered away from the
holder. Remove the jack when the length is
fully reduced.
Space cab models:
The jack and tool bag are positioned
behind the front seats. To access, tilt the
back of the seat forward. Refer to Seats in
chapter 3 for seat tilt lever location.
To remove the jack, turn the pressure
release knob anticlockwise, to reduce its
length, so it can be lowered away from the
holder. Remove the jack when the length is
fully reduced.
Crew cab:
The jack and tool bag are positioned
under the left rear seat.
To remove the jack, turn the pressure
release knob anticlockwise, to reduce its
length, so it can be lowered away from the
holder. Remove the jack when the length is
fully reduced.
Tool bag
Jack