Holden Trailblazer Owner Manual (Australia-Localizing-Australia-12333016) -
2019 - crc - 3/2/18
171
Bluetooth Music
Before playing Bluetooth music,
read the following information:
.
A mobile phone or Bluetooth
device that supports Advanced
Audio Distribution Profile (A2DP)
versions over 1.2 must be
registered and connected to the
vehicle.
.
From the mobile phone or
Bluetooth device, find the
Bluetooth device type to set/
connect the item as a stereo
headset.
.
e will appear on the screen if
the stereo headset is
successfully connected.
.
The sound played by the
Bluetooth device is delivered
through the infotainment system.
.
Bluetooth music can be played
only when a Bluetooth device
has been connected. To play
Bluetooth music, connect the
Bluetooth phone to the
infotainment system.
.
If the Bluetooth device is
disconnected while playing
phone music, the music is
discontinued. The audio
streaming function may not be
supported in some Bluetooth
phones. Only one function can
be used at a time between the
Bluetooth hands-free or Phone
music function. For example,
if you convert to Bluetooth
hands-free while playing Phone
music, the music is
discontinued. Playing music from
the car is not possible when
there are no music files stored in
the mobile phone.
Note
Verify the volume of your phone and
its music player. If it is too low, you
might not be able to hear the
Bluetooth music.
Note
Depending on the phone device
and/or player used, the music name
might not be displayed while playing
the music.
Playing Bluetooth Music
1. Press
{.
2. Touch AUDIO.
3. Touch Source.
4. Touch Bluetooth.
Pause
Touch
j to pause.
Touch
r to resume.
Playing the Next Song
Touch
l.
Playing the Previous Song
Touch
g within approximately
two seconds of playback time to
play the previous song.
Returning to the Beginning of the
Current Song
Touch
g after approximately
two seconds of playback time.
Search
Touch and hold
g or l to rewind
or fast forward.
Infotainment System - MyLink
To Next Page
Loading...
Need help?
General
