8EN 9 EN
Charging and Storage Charging and Storage
Charge the device fully before first use.
The indicator will turn blue and flash to show when the battery is low and it is
time to charge the device.
Ensure that the device and all parts are completely dry before charging. Insert
the vacuum cleaner into the charging base and connect the adapter to a pow-
er source to charge.
The power indicator turns red to show that the device is charging. It will take 2–3
hours to fully charge.
When charging is finished, the indicator turns blue and flashes for 10 seconds,
and then turns off. The device is now fully charged and ready to be used.
If the battery temperature dips below 0°C / 32°F, the device will stay off to pro-
tect the motor and battery. Do not store the device at a temperature below 0°C
/ 32°F.
To extend battery life, please avoid charging immediately after the device is ful-
ly discharged, the product needs to be cooled down for a few minutes.
Red
Blue
Turn off
2-3H
Flash
Avoid using the device when the battery surface is hot. Running the device at
a lower temperature helps to extend the working time and service life of the
battery.
Tips:
To Next Page
Loading...