Need help?Do you have a question about the Hollyland LARK 150 and is the answer not in the manual?
General| Frequency Range | 2.4GHz |
|---|---|
| Audio Output | 3.5mm TRS |
| Charging Port | USB-C |
| Number of Audio Channels | 2 |
| Sample Rate | 48kHz |
| Bit Depth | 16-bit |
| Latency | 5ms |
| Headphone Output | 3.5mm TRS |
| Power Source | Built-in Lithium Battery |
| Battery Type | Lithium-ion |
| Modulation | GFSK |
| Weight | 51g |
| Operating Range | Up to 100m (Line of sight) |
| Charging Time | 1.5 hours |
| Operating Distance | 100m |
Details the ports, buttons, and indicators on the LARK 150 transmitter.
Details the indicators and status information displayed on the receiver unit.
Instructions on how to pair the transmitter and receiver units for wireless communication.
Specifies the audio input and output interfaces available on the LARK 150.
Explains the distinctions between Mono, Stereo, and Safe Audio Track modes.
Details the purpose and benefits of the safe audio track mode.
Provides information on device working time and full charging duration.
Guides on how to check battery status and pair the wireless microphone units.
Instructions on how to upgrade the firmware of the LARK 150 system.
To Next Page
