Hollywood Racks HR6000 User Manual

Traveler Hitch Rack
Assembly and Use Instructions for Traveler Series Racks
HR6000 3-Bike Rack for 2” receiver HR6100 3 Bike Rack for 1-1/4” receiver
HR8000 4 Bike Rack for 2” receiver HR8100 4 Bike Rack for 1-1/4” receiver
HR9200 5 Bike Rack for 2” receiver
Warning! This product NOT to be used on any trailer or trailered vehicle.
 Drive slowly when using the rack on bumpy or dirt roads.
 Check the rack bikes and straps regularly during use.
 If you have any questions or installation problems, please see your Hollywood Racks retailer or
contact Hollywood Engineering at 800-747-4085.
3. Hitch Insert Tube (Fig. 3 ) and Upright beam assembly
4. Two Support arms with bike cradles and anti-sway blocks attached (Fig. 5 and 6).
5. One long attachment/safety strap (86” long) – Not shown.
After opening the
Traveler
box, you
should have the following parts:
1. Parts bag including two male knobs
and two spacer blocks. (Fig. 1)
.2. Parts bag including: threaded hitch
pin, hitch pin clip, star and flat washers,
¾” head through bolt, large washers and
self-fastening (nyloc) nut. (Fig. 2)

Hollywood Racks HR6000 Specifications

General

Product Type	Bike Rack
Model	HR6000
Rack Type	Hitch Mount
Capacity	2 Bikes
Weight Capacity (per bike)	35 lbs
Material	Steel
Foldable	Yes
Lockable	Yes
Hitch Compatibility	2-inch and 1.25-inch

Summary

Assembly and Use Instructions for Traveler Series Racks

Critical Safety Warning

Important safety warning against using the rack on trailers or trailered vehicles.

Included Parts Overview

Lists all components included in the Traveler hitch rack box for assembly.

Tools Required for Assembly

Specifies the tools needed for assembling and installing the hitch rack.

Assemble Hitch Insert Tube to Upright Beam

Connects the hitch insert tube to the upright beam assembly using a bolt and nut.

Attach Support Arms to Main Tube

Details on how to attach the support arms to the main horizontal tube using knobs.

Installing the Traveler Hitch Rack on Your Vehicle

Rack Installation Procedure

Step-by-step guide for inserting the rack into the vehicle's hitch receiver and securing it.

Installing Bikes on the Rack

Instructions on how to position and secure bicycles onto the rack's support arms.

Securing Bike Wheels

Crucial step to attach the long strap through all bike wheels to prevent spinning.

Special Fitting and Usage Notes

Adjusting Anti-Sway Blocks

Guidance on removing lower anti-sway blocks for small or uniquely framed bikes.

Folding Arms When Not in Use

Instruction on how to fold down the support arms for storage or when the rack is not in use.

Warranty and Liability Information

Limited Lifetime Warranty Details

Covers defects in materials and workmanship for the original purchaser.

Warranty Exclusions

Lists conditions not covered by the warranty, such as wear, misuse, or incorrect assembly.

Disclaimer of Liability

States that Hollywood Racks is not liable for indirect damages or damage to vehicles/cargo.