Holman QCS2 Series - Daily Operation; Operating Hints and Safety

6
DAILY OPERATION
Check the power cord to insure that it is plugged into a proper outlet.
Set the heat control knobs to desired temperature.
Always allow 10 minutes of preheat time before loading the unit with product. Failure to allow sufcient
preheat time will result in unsatisfactory cooking until the unit reaches operating temperature.
OPERATING HINTS AND SAFETY
Disconnect power to the unit with the switch at the end of each day of operation.
Do not leave the unit in operation without an attendant.
Turn Power Saver Switch to Standby during idle periods. It will take only a few minutes to
regain operating temperature.
Do not leave the unit at high temperature when not in use or during idle periods.
This will cause food particles and grease lm to carbonize.
CAUTION
Q
C
S
®
e