Need help?Do you have a question about the Holmatro HLB Series and is the answer not in the manual?
Legal notice regarding publication use, modifications, and liability for Holmatro equipment.
Explains the origin of the manual's content and language versions.
Defines key terms used in the user manual for lifting bag systems.
Details the intended use of Holmatro lifting bags for lifting or forcing aside structural parts.
Specifies that only trained personnel should operate the system and outlines repair requirements.
Outlines terms and conditions for product guarantee, including voiding conditions.
Confirms CE certification and compliance with essential safety requirements.
Explains symbols indicating dangers, warnings, and important notes in the manual.
Describes the model plate and CE marking on the equipment and explains associated pictograms.
General safety guidelines applicable to the use and maintenance of the equipment.
Mandates wearing personal protective equipment (PPE) during operation for injury prevention.
Provides safety guidelines for operating the lifting bag system and its components.
Details safety procedures for the overall operation of the lifting bag system.
Outlines safety precautions to be followed during maintenance activities.
Describes the construction and features of Holmatro HLB lifting bags.
Explains the system for designating different types of HLB lifting bags.
Identifies key components and markings on the lifting bag system for reference.
Provides a table of weights and dimensions for various HLB lifting bag models.
Lists technical specifications such as temperature range, directives, standards, and capacity for HLB bags.
Lists available accessories for the Holmatro lifting bag system, including hoses and control units.
Instructs users to check equipment for completeness and damage before initial use.
Explains the basic setup and operation of the Holmatro lifting bag system.
Details the operation and features of the SCV/DCV 10 U control unit.
Details the operation and features of the HDC 10 AU control unit.
Emphasizes checking equipment before use and adhering to safety regulations.
Lists pre-operation checks for lifting bags, hoses, couplings, and air sources.
Provides instructions for connecting and operating the lifting bag system during use.
Details procedures for shutting down, disconnecting, inspecting, cleaning, and storing the equipment.
Guides users to consult the dealer for unresolved issues and specify model/serial numbers.
Addresses common causes and solutions when lifting bags fail to lift loads.
Identifies potential causes and solutions for air leaks within the lifting bag system.
Instructs users to stop use and seek professional inspection if the system is damaged.
Highlights the importance of preventive maintenance for safety and equipment longevity.
Warns about proper handling and disposal of used or leaked fluids and products.
Provides a general schedule for routine maintenance checks on lifting bags and accessories.
Details specific maintenance tasks for lifting bags, couplers, hoses, and skid-resistant profiles.
Recommends annual professional checks and testing by a Holmatro Certified Technician.
Provides instructions for preparing and storing lifting bags for extended periods.
General| Brand | Holmatro |
|---|---|
| Model | HLB Series |
| Category | Lifting Systems |
| Language | English |
To Next Page