EasyManua.ls Logo

Holmes HAP8650 - User Manual

Holmes HAP8650
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
FILTER CLEANING
TROUBLESHOOTING
5 YEAR LIMITED WARRANTY
Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation (Canada)
Limited doing business as Jarden Consumer Solutions (collectively “JCS”) warrants that for a period of five years from
the date of purchase, this product will be free from defects in material and workmanship. JCS, at its option, will repair
or replace this product or any component of the product found to be defective during the warranty period.
Replacement will be made with a new or remanufactured product or component. If the product is no longer available,
replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. Do NOT
attempt to repair or adjust any electrical or mechanical functions on this product. Doing so will void this warranty.
This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable.
Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. JCS dealers, service
centers, or retail stores selling JCS products do not have the right to alter, modify or any way change the terms and
conditions of this warranty.
This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or
misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair
or alteration by anyone other than JCS or an authorized JCS service center. Further, the warranty does not cover: Acts
of God, such as fire, flood, hurricanes and tornadoes.
What are the limits on JCS’s Liability?
JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or
statutory warranty or condition.
Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a
particular purpose is limited in duration to the duration of the above warranty.
JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise.
JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use
the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of
contract, fundamental or otherwise, or for any claim brought against purchaser by any other party.
Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or
limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights that vary from province to province,
state to state or jurisdiction to jurisdiction.
How to Obtain Warranty Service
In the U.S.A.
If you have any questions regarding this warranty or would like to obtain warranty service, please call
1-800-546-5637 and a convenient service center address will be provided to you.
In Canada
If you have any questions regarding this warranty or would like to obtain warranty service, please call
1-800-546-5637 and a convenient service center address will be provided to you.
In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions located
in Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited doing
business as Jarden Consumer Solutions, located at 20 B Hereford Street, Brampton, Ontario L6Y OM1. If you have any
other problem or claim in connection with this product, please write our Consumer Service Department. PLEASE DO
NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE.
WARRANTY INFORMATION
PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS
Owners Guide
HAP8615/HAP8625
HAP633/HAP8650/HAP8650B
True HEPA
Allergen Remover
190648 Rev. A HAP8615_HAP8625_HAP8650_HAP633_16EM2 Printed In China
GCDS-HOL49189-BB
© 2016 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All Rights Reserved.
Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.
Sunbeam Products, Inc. is a subsidiary of Newell Brands Inc. (NYSE: NWL)
NOTE: Filters can be purchased at a retailer near you, online at www.holmesproducts.com or by calling 1-800-546-5637.
Air Purifier
Model Number
Filter Quantity
Needed
Filter Model
Number
Filter
Description
HAP8615 / HAP633 1 each
HAPF600 (B Filter)
HAPF60 (C Filter)
True HEPA Filter
Carbon filter
HAP8625 2 each
HAPF600 (B Filter)
HAPF60 (C Filter)
True HEPA Filter
Carbon filter
HAP8650 3 each
HAPF600 (B Filter)
HAPF60 (C Filter)
True HEPA Filter
Carbon filter
If you have any questions regarding your product or would like to learn more about other Holmes
®
products, please
contact our Consumer Service Department at 1-800-546-5637 or visit our website at www.holmesproducts.com. For
inquiries regarding recycling and proper disposal of this product, please contact your local waste management facility.
PROBLEM SOLUTION
Unit will not operate
Make sure unit is properly plugged in and the outlet is energized.
If the grill door is not fully closed, the unit will not operate. Make sure the filters are
properly installed and firmly close the grill door by pushing on its right side.
• Check to make sure the unit is on by turning the knob onto a desired speed setting.
Decreased air flow
Check to ensure nothing is blocking air inlet and filtered air outlet.
• If the Filter Life Monitor light is red, the filters need to be changed.
• If the filters have not been changed in a year or more, change the HEPA filters.
• Ensure carbon filters are changed every 3-6 months.
Excessive Noise.
Make sure parts are firmly positioned in place.
• Remove plastic bags from filters, if applicable.
TIPS & TROUBLESHOOTING
HAP8615_HAP8625_HAP8650_HAP633_16EM2.indd 1 11/29/16 9:51 AM
Question and Answer IconNeed help?

Do you have a question about the Holmes HAP8650 and is the answer not in the manual?

Summary

Filter Cleaning Troubleshooting

Troubleshooting Specific Issues

Covers unit not operating, decreased airflow, and excessive noise with their respective solutions.

Warranty Information

5 Year Limited Warranty

Details the five-year warranty terms, coverage, and limitations for the product.

Obtaining Warranty Service

Instructions for obtaining warranty service in the USA and Canada.

Important Safeguards

General Safety Precautions

Essential safety guidelines for operating the appliance to prevent fire, shock, or injury.

Power Cord Instructions

Power Cord Handling and Safety

Guidance on using extension cords and ensuring safe cord placement, including polarized plug information.

Features and Operation

Pre-Operating and Setup

Steps before operation, including filter installation, speed settings, and filter life monitoring.

Filter Information

Details on HEPA filters, their capabilities, and settings for optimal air filtration.

Filter Maintenance

Instructions for cleaning the unit and replacing HEPA and carbon filters.

Overview

This document describes the Holmes True HEPA Allergen Remover, an air purifier designed to improve indoor air quality by filtering out airborne allergens and pollutants.

Function Description

The Holmes True HEPA Allergen Remover is an air purification device that utilizes a multi-stage filtration system to capture airborne particles. Its primary function is to remove up to 99.97% of airborne allergens as small as 0.3 microns from the air passing through the filter. This includes common allergens such as ragweed pollen, grass pollen, tree pollen, household dust, dust mite debris, mold spores, pet dander, and smoke. The device employs True HEPA (High Efficiency Particulate Air) filters, which are specifically designed for this high level of filtration efficiency. In addition to the True HEPA filters, the system also incorporates carbon filters, which are effective in reducing odors and capturing larger particles. The air purifier is designed for continuous operation to maintain optimal air filtration in indoor environments.

Usage Features

The air purifier offers flexible placement options, as it can be operated either upright or lying on its side. It is also designed to fit flush against a wall, provided that the air inlet grill, filters, and air outlet are not obstructed to ensure maximum airflow.

To operate the device, users first need to prepare it by removing any plastic coverings from the unit and filters. The front grill door opens to allow access for filter installation. Carbon filters, which come packed in a plastic bag, must be removed from their packaging and placed onto the pre-installed HEPA filters, with plastic tabs holding them in place. Once the filters are correctly installed and the grill door is firmly closed, the unit is ready for use.

The air purifier is controlled via a speed control knob, offering multiple settings to suit different needs. These settings include:

  • HIGH (4): Recommended for situations with high levels of allergens, providing maximum filtration.
  • MEDIUM (3): The optimal setting for continuous operation and general air filtration.
  • LOW (2): Suitable for quieter operation, such as in a bedroom environment.
  • SLEEP (1): The quietest setting, ideal for undisturbed sleep.

The device is equipped with a Filter Life Monitor, which provides a visual indication of the remaining filter life through a series of lights. When filters are new and in good condition, the top light illuminates green. As the filters accumulate particles and their effectiveness decreases, the monitor progresses to yellow, indicating that the carbon and HEPA filters should be checked. When the light turns red, it signals that the filters need to be changed.

For safety, the unit will not operate if the grill door is not fully closed, ensuring that filters are properly installed before use. Users should ensure the unit is properly plugged into a 120V AC electrical outlet and that the knob is turned to a desired speed setting for operation.

Maintenance Features

Regular maintenance is crucial for the optimal performance and longevity of the Holmes True HEPA Allergen Remover. Maintenance primarily involves cleaning the unit and replacing the filters.

Cleaning:

  • Before any cleaning, the air purifier must be turned off and unplugged from the power outlet.
  • The exterior of the unit can be cleaned with a soft, clean, damp cloth.
  • The filtered air outlet and top air vent can be cleaned of dust using a small, soft brush.
  • If cleaning the inside of the air purifier is necessary, filters should be removed, and only a dry, soft cloth should be used to wipe down the interior.
  • Important: Filters should never be washed. Moisture should not come into contact with the main housing of the air purifier.

Filter Replacement:

  • True HEPA Filters: These filters should not be washed or reused. They typically need to be replaced every 12-18 months, though filter life can vary based on air quality and usage. When replacing, the old HEPA filters should be discarded, and new ones inserted.
  • Carbon Filters: These filters need to be replaced more frequently, typically every 3-6 months. When replacing, the old carbon filter should be removed, and a new one inserted in its place, guided by the plastic tabs.
  • Pre-filters (for models HAP633 & HAP8650): The foam pre-filter should be periodically checked. It can be cleaned by washing it in warm soapy water, rinsing, and drip-drying before being reinstalled.
  • After replacing the HEPA filters, the Filter Life Monitor must be reset. This is done by inserting a small object (like a pin or paper clip) into the hole below the red filter change light marked "RESET" and holding it down for 2-3 seconds.

Users can purchase replacement filters from retailers, online at www.holmesproducts.com, or by calling customer service. If the Filter Life Monitor light is red, or if air flow decreases significantly, it indicates that filters need to be changed. If filters have not been changed in a year or more, HEPA filters should be replaced. If carbon filters have not been changed every 3-6 months, they should be replaced.

For any questions regarding the product or warranty service, customers can contact the Consumer Service Department via phone or visit the Holmes website. For inquiries about recycling and proper disposal, local waste management facilities should be consulted.

Holmes HAP8650 Specifications

General IconGeneral
ModelHAP8650
Filter TypeHEPA
Air Changes per Hour4.8
Number of speeds3
Voltage120V

Related product manuals