9
5. MAINTENANCE AND ADJUSTMENT INSTRUCTIONS
Maintenance targets
Disconnect the electrical cord from the socket before performing any maintenance,
adjustment or repair measures.
Daily maintenance
In private use, roller chains must be lubricated twice a year or once every 100 hours of use. Always
check the chain tension before commencing work. The chains can be adjusted by moving the gear
shafts. Spray Vaseline or another suitable lubricant should be used for lubrication.
Lubrication points
The device bearings are permanently lubricated, so they do not require lubrication. If the machine is
subjected to particularly heavy use, it may be necessary to lubricate the bearings. However, this is
only necessary in exceptional conditions, for example, when the machine is rented out constantly.
To Next Page
Loading...