1) Taking Photos or Recording Video
Momentarily press the button to take photos. The remaining memory space, represented as remaining
percentage, will be displayed in the lower right corner of the screen. For example, means there is 10%
of storage space remaining. Long press the button to start video recording. When the video is being recorded
the blue indicator light is constant and a dot flashes in the lower right corner of the screen. Press and hold again
to exit camera mode. You can take photos during the video recording process by pressing momentarily while
recording. After taking photos or videos, the percentage of remaining storage space is displayed in the lower right
corner of the screen.
2) Digital Reticle Adjustment
Short press the button to adjust the brightness of the digital reticle. Select between Off → black → low light
→ high light → OFF. Press and hold the button once to select from three different reticles. Switch between
Crosshair → Circle-Dot → T-Reticle 1 → T-Reticle 2.
3) Magnification Adjustment
Momentarily press the button to adjust the screen magnification. The default magnification is 1X and can
cycle between 1x, 2x, 4x, and 8x in sequence. The magnification power and icon will display in the upper right
corner of the screen.
4) Screen Brightness Adjustment
Press the button to adjust the screen brightness cycling from setting 1 to setting 6. The current brightness
setting number will be displayed in the lower right corner of the screen, for example setting 4 will display as
OLEDBri4. The brightness setting value will disappear after 2 seconds.
5) Main Menu Settings
Long press the button to deactivate or activate all symbols in the upper right corner of the screen. To enter
the main menu, momentarily press the button. While in the main menu screen, if no function is selected the
To Next Page
Loading...