To Next PageTo Next Page
Need help?Do you have a question about the Holtek HT48R50A-1 and is the answer not in the manual?
General| Brand | Holtek |
|---|---|
| Model | HT48R50A-1 |
| Category | Microcontrollers |
| Language | English |
Electrical characteristics under DC conditions, including voltage, current, and timing parameters.
Registers associated with timers/event counters.
Registers for configuring and controlling I/O ports.
Explains external interrupt pins and their configuration.
Describes external timer input pins and their sharing.
Describes the three methods for generating the system clock.
Explains how to select internal or external clock sources for timers.
Explains how to configure timers for external event counting.
Registers for controlling and managing interrupts.
Details on external interrupt configuration and triggering.
Details the UART interrupt mechanism.
Describes the different types of microcontroller resets.
Explains how to enter and exit power-down mode.
Lists the key features of the integrated UART module.
Explains the physical connection of UART pins.
Explains how to enable or disable the UART function.
Steps to initiate data reception.
Explanation of overrun errors and the OERR flag.
Explanation of framing errors and the FERR flag.
Explanation of parity errors and the PERR flag.
Details the execution cycles for different instruction types.
Covers add, subtract, increment, decrement instructions.
Enters Power Down Mode.
Holtek's integrated development environment.
Describes the HT-ICE emulator for real-time emulation and debugging.
Discusses tools for OTP device programming and adapter cards.
Lists the hardware and software requirements for HT-IDE3000.
Steps for physically installing the HT-ICE.
Guide to creating a new project in HT-IDE3000.
Steps to assemble and compile the project.
Process for programming OTP devices.
