Why does my HOLZMANN MASCHINEN NTS 250 Grinder slow down when working?
If your HOLZMANN MASCHINEN Grinder slows down during operation, it might be due to applying too much pressure on the sanding abrasive. Try using less pressure on the workpiece.
What to do if my HOLZMANN MASCHINEN NTS 250 Grinder produces a bad sharpening result?
If you're experiencing a bad sharpening result with your HOLZMANN MASCHINEN Grinder, the angle might be set incorrectly. Verify the current angle setting and adjust it if necessary.
How to fix HOLZMANN MASCHINEN NTS 250 Grinder magnetic support with no magnetic force?
If the magnetic support of your HOLZMANN MASCHINEN Grinder has no magnetic force, you should: 1. Check the switch. 2. Check all power connections. 3. Change the fuse or reset the circuit breaker. 4. Change the cable.
What to do if HOLZMANN MASCHINEN NTS 250 sanding disc runs out of round?
If the sanding disc on your HOLZMANN MASCHINEN Grinder runs out of round, the grinding wheel may be worn. Dressing the grinding wheel should resolve this issue.
Defines the machine's purpose and user responsibilities.
Provides essential safety guidelines for operation and environment.
Details inherent risks associated with the machine's design and operation.
Instructions for placing and fixing the grinding wheel.
Instructions for mounting and fixing the polishing wheel.
How to attach the water reservoir to the grinder body.
How to position and fix the universal support.
How to place the tool rest on the universal support.
General operational guidelines and pre-use checks for the machine.
Detailed steps for sharpening tools and knives using the machine.
Specific procedure for sharpening knives.
Steps for polishing blades to optimize sharpness.
Procedure for dressing the grinding wheel to maintain its shape and performance.
Instructions for regular cleaning of the machine after use.
Guidelines for environmentally responsible disposal of the machine.
Instructions on how to order spare parts and warranty implications.
Exploded view diagram showing all machine parts with numbers.
Information on repair services after the warranty period expires.
General| Grinding wheel size | 250 mm |
|---|---|
| Grain grit | K 220 |
| Speed | 90 RPM |
| Motor power s1 | 200 W |
| Voltage | 230 V |
| Grinding wheel diameter | 250 mm |
| Max. grinding wheel width | 50 mm |
| Grinding wheel speed | 90 RPM |
| Motor power | 200 W |
| Frequency | 50 Hz |
To Next Page