Holzstar ADH 305 - Default Chapter; Table of Contents

2 ADH-Series | Version 1.05
Imprint
Product identification
Planer-Thicknesser Item No.
ADH 200 5905200
ADH 250 5905250
ADH 305 5905305
Manufacturer
Stuermer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Germany
Fax: 0049 (0) 951 96555 - 55
E-Mail: info@holzstar.de
Internet: www.holzstar.de
Information about the operating instructions
Original operating instructions
Published: 10.05.2017
Version: 1.05
Language: english
Author: ES/MS
Copyright information
Copyright © 2017 Stürmer Maschinen GmbH, Hallstadt,
Germany.
Stürmer Maschinen GmbH is the sole owner of the con-
tent of these operating instructions.
Forwarding and reproduction of this document as well
as use and notification of its content is not permitted wit-
hout explicit consent. Infringements will lead to claims
for damages.
Subject to technical changes and errors.
Contents
1 Introduction .............................................................3
1.1 Copyright............................................................ 3
1.2 Customer service................................................ 3
1.3 Disclaimer........................................................... 3
2 Safety........................................................................3
2.1 Legend of symbols............................................. 3
2.2 Operator responsibility ....................................... 4
2.3 Operating staff qualification ............................... 4
2.4 Personal protective equipment........................... 5
2.5 Safety labels on the Planer-Thicknesser ............ 5
2.6 Safety devices .................................................... 5
2.7 General safety aspects....................................... 6
3 Designated use........................................................7
4 Technical Data.........................................................8
4.1 Type plate........................................................... 8
5 Transport, packaging, storage...............................8
5.1 Delivery and transport ........................................ 8
6 Machine description................................................9
6.1 Illustration ........................................................... 9
6.2 Scope of supply.................................................. 9
7 Installation and erection .........................................9
7.1 Requirements for the place of installation .......... 9
7.2 Installation of the Planer-Thicknesser............... 10
8 Operation ...............................................................11
8.1 Planing.............................................................. 11
8.2 Thicknessing..................................................... 13
8.3 Adjustment of the cutter block.......................... 13
8.4 Workflow ........................................................... 14
9 Care, maintenance and overhaul/repair..............15
9.1 Care after working ............................................ 15
9.2 Maintenance and repair ................................... 15
9.2.1 Functional check......................................... 15
9.2.2 Extraction device......................................... 15
9.2.3 Lubrication ..................................................15
9.2.4 Change of the drive belt..............................15
10 Troubleshooting..................................................16
11 Disposal, recycling of used devices..................16
11.1 Decommissioning........................................... 16
11.2 Disposal of electrical devices......................... 16
11.3 Disposal of lubricants..................................... 16
12 Electric circuit diagram.......................................17
13 Spare parts...........................................................17
13.1 Order of spare parts....................................... 17
13.2 Spare parts drawings ..................................... 18
14 EC Declaration of Conformity ............................21