What to do if the grinding disk runs off driving wheels on my Holzstar Grinder?
If the grinding disk runs off the driving wheels on your Holzstar Grinder, the grinding disk might not be sticking properly. Try adjusting the grinding belt track to fix this.
Why is the service life of grinding tools poor on my Holzstar Grinder?
If you're experiencing a poor service life of grinding tools with your Holzstar Grinder, it might be because the grinding tools’ (belt or wheel) granulation is too fine. Consider using a grinding disk with a rougher granulation.
How to improve the look of ground surface with my Holzstar Grinder?
If the ground surface looks poor when using your Holzstar Grinder, the grinding tools’ granulation might be too rough. Try using a grinding disk with a finer granulation.
What to do if the grinding disk does not rotate symmetrically on my Holzstar Grinder?
Defines symbols indicating hazards and precautions.
How to identify the machine using its nameplate.
Lists key technical parameters for BTS 150 and BTS 250.
Essential safety rules for operating the machine.
Potential dangers even when following safety guidelines.
Labels and descriptions of all operational controls.
Steps to attach the safety stop.
Steps to assemble and attach the work table.
Safety and best practices before starting.
Instructions for turning the machine on and off.
Technique for grinding flat surfaces on the belt.
Technique for edge grinding in vertical position.
Important tips and precautions for grinding.
Solutions for common machine problems.
To Next Page
General
