What to do if my Holzstar Tool Storage machine does not start?
If your Holzstar Tool Storage machine doesn't start, it could be due to a defective or broken cable. Try changing the feed cable. Another reason could be an obstruction preventing the blade from turning, in which case you should remove any obstructions. Lastly, the motor or connections might be out of order. Have these repaired by an electrician or replace them with new parts.
Why is there a burning smell and insufficient cutting capacity in my Holzstar Tool Storage?
If the cutting capacity of your Holzstar Tool Storage is insufficient and you notice a burning smell when starting the motor, it might be due to incorrect assembly. Ensure the machine is assembled correctly. Alternatively, there may be a defect present, and you may need to replace the machine.
Why is my Holzstar Tool Storage overheating due to insufficient motor capacity?
If the motor capacity of your Holzstar Tool Storage is insufficient and causing overheating, it might be because the extension is too long or the section is too small. In this case, check the conditions of use.
General| Brand | Holzstar |
|---|---|
| Model | TKS 315 Pro |
| Category | Tool Storage |
| Language | English |
To Next Page