1
2
1
2
IMPORTANT:
The seat cushion is
adjustable.
1 is the front file; 2 is the rear
stop.
The bolt holes indicated by 2
can expand the riding space
6. Insert the guardrail bracket into the seat
tube and secure it with screws.
7. Align the seat with the frame screw hole and
secure it with screws.
8. Insert the seat cover into the saddle, then
thread the safety shoulder strap through the back-
rest hole and secure it with the safety belt C-clasp.
Pull up the zipper behind the backrest. Then install
the left and right components of the frame along
the grooves of the socket, pass through the front
frame of the seat cover, and close the left and right
frames.
9. Refer to the diagram. First, insert the push rod
into the connecting pipe at the rear of the seat
until it clicks, indicating it is locked. Hang the
bottle rack. Then align and insert the canopy
tube into the backrest tube and lock it. Finally,
position the basket properly and secure it with
basket fixing screws and nuts.
Installation note:
After installing the
sunshade, press the
backside lock buckle
downwards to secure
the sunshade.
8
To Next Page
Loading...
Need help?
General
