-8-
Step 5:
Pull out the silent foot plug or suction cup, put the support connecting rod on the
two feet respectively (Fig. 6), then lock with triangle screws. When screwing the
foot tube, hold it and not the support rod.
Step 6:
After connecting the handrail bracket with the cross bar, tighten with triangle
screws (Fig. 7) and horizontally insert the connecting rod into the bracket, so it
connects to the foot tube - lock it with pentagonal screws.
Step 7:
Put the mute foot plug into the leg tube. (Fig. 8) Installation is complete.(Fig. 9)
Ensure all steps are followed when installing this product to avoid damage.
Fig. 6 Fig. 7 Fig. 8
Fig. 9
To Next Page
Loading...
Need help?
General
