home casual PALAMOS User Manual

Parts List
A
A
B
D
C
CHAIR ARM
(LEFT WHEN
SITTING)
CHAIR ARM
CHAIR BACK
CHAIR SEAT
BOLT (M6x15)
METAL WASHER
PLASTIC BOLT
CAP
HEX WRENCH
B
C
D
E
2
2
2
2
1
20
20
20
F
G
H
(RIGHT WHEN
SITTING)
PALAMOS DEEP SEATING CHAIR
IMPORTANT: PLEASE READ COMPLETE INSTRUCTION SHEET PRIOR TO ASSEMBLY!
Identify all parts packed in carton against the parts list. Remove all protective
materials, place parts on a nonabrasive surface to avoid scratching. If any parts
are missing or damaged, DO NOT attempt to assemble. Please contact our
customer service center (Monday-Friday 9:00 a.m.-5:00 p.m.CST) at
1-866-538-7735 (fax:952-946-0031), e-mail: custserv@homecasual.net or
visit our website at www.homecasual.net.
STEP 1
Place chair back (C) on a flat, soft surface.
Attach chair arm (left) (A) to chair back (C) by using bolts (E) with metal washers (F)
through each hole of the chair arm and into the chair back (C). Repeat this step for
chair arm (right) (B). (DO NOT TIGHTEN COMPLETELY !)
Attach chair seat (D) to the chair arm by using bolts (E) with metal washers (F)
through each hole of the chair arm and into the chair seat (D).
(DO NOT TIGHTEN COMPLETELY !)
STEP 2
Attach chair seat (D) to the chair back (C) by using bolts (E) with metal washers (F)
through each hole of the chair seat and into the chair back.
STEP 3
Tighten all bolts with the Hex wrench. Cover all bolts with plastic bolt caps.
Place the cushion on the chair seat.
Your chair is now ready for use.
STEP 4
Thank you for choosing a Home Casual product!
(detail photo)
Step 1
Step 3
Step 2
D
C
A
B

home casual PALAMOS Specifications

General

Brand	home casual
Model	PALAMOS
Category	Outdoor Furnishing
Language	English

Summary

Palamos Deep Seating Chair

Parts List

Lists all components and hardware required for chair assembly.

Step 1: Attach Chair Arms

Instructions for attaching the left and right chair arms to the chair back.

Step 2: Attach Seat to Arms

Instructions for attaching the chair seat to the chair arms using bolts and washers.

Step 3: Attach Seat to Back

Instructions for connecting the chair seat to the chair back.

Step 4: Final Tightening and Caps

Final steps involve tightening all bolts and covering them with plastic caps.

Palamos Deep Seating Loveseat

Parts List

Lists all components and hardware required for loveseat assembly.

Step 1: Attach Loveseat Arms

Instructions for attaching the left and right loveseat arms to the loveseat back.

Step 2: Attach Seat to Arms

Instructions for attaching the loveseat seat to the loveseat arms.

Step 3: Attach Seat to Back

Instructions for connecting the loveseat seat to the loveseat back.

Step 4: Final Tightening and Caps

Final steps involve tightening all bolts and covering them with plastic caps.

Palamos 40"x 20" Coffee Table

Parts List

Lists all components and hardware required for coffee table assembly.

Step 1: Attach Table Legs

Instructions for attaching the four table legs to the underside of the tabletop.

Step 2: Attach Leg Connector Brackets

Instructions for securing leg connector brackets to the table legs.

Step 3: Final Position and Touch-up

Instructions for turning the table upright and using touch-up paint.