To Next PageTo Next PageWhat to do if my Home Decorators Collection CASUN 11252AIWNCN remote control is not working?
If the remote control for your Home Decorators Collection Fan isn't working, make sure the fan is not connected to any wall-mounted variable speed controls. Also, verify that the dip switches on the remote control and receiver are set to the same frequency.
How to fix a Home Decorators Collection Fan that wobbles?
If your Home Decorators Collection Fan wobbles, first check that all blade and blade arm screws are secure. Most wobble problems occur when blade levels are unequal. To check this, select a point on the ceiling above the tip of one blade and measure the distance from the center of each blade to that point. The deviation in measurements should be within 1/8 inch. Run the fan for 10 minutes after adjustments.
What to do if my Home Decorators Collection Fan will not start?
If your Home Decorators Collection Fan doesn't start, there are a few things you can check. First, examine the main and branch circuit fuses or breakers. Next, check the line wire connections to the fan and the switch wire connections in the switch housing. Finally, ensure that the dip switches on both the remote control and the receiver are set to the same frequency.
Why is my Home Decorators Collection CASUN 11252AIWNCN so noisy?
If your Home Decorators Collection Fan is making noise, ensure all motor housing screws are snug and that the screws attaching the fan blade arm to the motor hub are tight. Also, check that wire nut connections are not rattling against each other or the interior wall of the switch housing. If you're using a ceiling light kit, make sure the screws securing the glassware are tight and the light bulb is secure. Allow a 24-hour 'breaking-in' period, as most noises disappear during this time. Confirm there's a short distance from the ceiling to the canopy, ensuring it doesn't touch the ceiling. Lastly, ensure your ceiling box is secure and rubber isolator pads are used between the mounting bracket and outlet box.
Why does my Home Decorators Collection CASUN 11252AIWNCN Fan move backwards and forwards when turned on?
This is normal for Home Decorators Collection DC motor fans. The partial movement during start-up is the result of the DC motor aligning the internal magnetic poles for proper motor operation. This design saves electricity and allows the fan to operate much quieter than standard AC motor fans.
General| Brand | Home Decorators Collection |
|---|---|
| Model | CASUN 11252AIWNCN |
| Type | Ceiling Fan |
| Blade Span | 52 inches |
| Number of Blades | 5 |
| Motor Type | AC |
| Light Kit Included | Yes |
| Remote Control | Yes |
| Blade Pitch (degrees) | 12 |
| Bulb Type | LED |
| Damp/Wet Rating | Damp |
| Indoor/Outdoor | Indoor |
| Light Bulb Base Code | E26 |
| Number of Speeds | 3 |
| Reverse Airflow | Yes |
| Size | 52 in. |
| Reversible Motor | Yes |
| Light Included | Yes |
| Blade Material | MDF |
| Blade Color | Walnut |
| Mounting Type | Downrod |
| Warranty | Lifetime |
Essential safety warnings regarding electrical shock, personal injury, installation, and proper usage.
Lists necessary tools for installation, including Phillips screwdriver, flat blade screwdriver, step ladder, wire stripper, and electrical tape.
Details all the hardware components provided with the fan, with part numbers and quantities.
Lists all parts included in the fan package with their corresponding descriptions and quantities.
Explains different methods for mounting the fan, including required outlet box specifications and support.
Instructions for securing the mounting bracket to the ceiling outlet box using provided screws.
Steps to attach the downrod to the fan motor assembly, including securing pins and screws.
Guides on sliding the coupling cover and canopy onto the downrod and reattaching the hanger ball.
Instructions for lifting and seating the fan motor assembly into the mounting bracket securely.
Detailed steps for connecting the fan's wires to the house supply wires, including safety warnings.
Steps to attach the canopy to the mounting bracket using screws and secure the canopy cover.
Instructions for attaching the fan blades to the blade holders and then to the fan motor assembly.
Steps to attach the light kit assembly, including the metal cage, glass shade, and LED bulbs.
Guide on installing the battery, handling precautions, and the remote control learning process.
Explains the functions of the fan button, speed controls, light controls, and fan reverse button.
Instructions on how to mount the remote control holder on the wall using screws.
Provides guidelines on checking connections, cleaning the fan, and what not to do during cleaning.
Addresses common fan issues like not starting, noise, remote failure, wobbling, and reverse movement.
