What to do if my Home Decorators Collection FEU1611LM Lantern comes on for no apparent reason?
Your Home Decorators Collection Lantern might be turning on due to street or sidewalk traffic triggering the motion sensor; try lowering the sensitivity. Another cause could be a heat source like a heater, dryer vent, or heated swimming pool causing false triggering. In this case, eliminate the heat source or relocate the fixture.
Why does my Home Decorators Collection FEU1611LM Lantern not turn on when there is motion?
If your Home Decorators Collection Lantern isn't turning on with motion, several factors could be at play. First, check that the wall switch or circuit breaker is turned on. Ensure that the wire connections are correct and secure. If it's early evening, too much sunlight shining on the photocell sensor might be the issue; consider relocating the fixture away from a western-facing wall. Also, check for other light sources interfering with the photocell sensor; eliminate them, block their light, or relocate the fixture. Finally, if the motion sensor is mounted too high, moving people or vehicles might be out of its view; relocate the fixture to a lower position.
Why does my Home Decorators Collection FEU1611LM stay on continuously in motion sensing mode?
If your Home Decorators Collection Lantern stays on continuously in motion sensing mode, it might be due to a heat source like a heater, dryer vent, or heated swimming pool causing false triggering. To resolve this, try eliminating the heat source or relocating the fixture.
How to fix a Home Decorators Collection Lantern that comes on during the daytime?
If your Home Decorators Collection Lantern comes on during the daytime or too early in the evening, it might be installed in a shaded area, such as under a porch or eave, which prevents daylight from reaching the photocell sensor. Try relocating the fixture to a brighter location.
Critical safety warnings, including electrical precautions and compliance notices.
Details warranty coverage, exclusions, and conditions for the lighting fixture.
Technical details like sensor range, detection angle, and electrical requirements.
Advice on choosing the best placement for optimal motion sensor performance.
Lists required tools, hardware, and initial planning for the fixture installation.
Identifies all parts included in the package for assembly.
Steps for assembling finials and mounting the fixture to the electrical box.
Instructions for connecting wires and securely mounting the fixture to the wall.
Guidance on applying caulk to prevent water ingress into the electrical box.
Explains sensitivity settings and timer modes for the motion sensor.
Instructions on how to clean the fixture safely and effectively.
Provides solutions for common problems encountered with the motion sensor light.
General| Brand | Home Decorators Collection |
|---|---|
| Model | FEU1611LM |
| Category | Lantern |
| Color | Black |
| Color Family | Black |
| Material | Metal |
| Finish | Matte |
| Bulb Type | LED |
| Bulb Included | Yes |
| Voltage | 120V |
| Wattage | 60W |
| Outdoor Use | Yes |
| Indoor Use | Yes |
| Style | Traditional |
| Theme | Classic |
To Next Page
