How to turn on Home Decorators Indoor Fireplace?
To turn on your Home Decorators Indoor Fireplace, ensure the unit is plugged into a standard 120V outlet. Then, press the Power button on the control panel.
What to do if my Home Decorators Indoor Fireplace remote control is not working?
If the remote control for your Home Decorators Indoor Fireplace isn't working, try changing the batteries first. When using the remote, operate it at a slow and steady pace. Press the buttons gently and evenly. Avoid pressing buttons rapidly in succession, as this may cause the transmitter to malfunction.
What to do if my Home Decorators SF122-26AI Indoor Fireplace heater does not work, but the power and heater switches are on?
If the heater on your Home Decorators Indoor Fireplace isn't working, even with the power and heater switches on and the thermostat set to high, turn all switches to the off position and unplug the unit from the wall outlet for 5 minutes. After 5 minutes, plug it back in and operate as normal.
What to do if my Home Decorators SF122-26AI display unit shows '88' and is flashing?
If the display unit on your Home Decorators Indoor Fireplace control panel shows “88” and the function indicator is quickly flashing, indicating an alarm, unplug the unit from the wall outlet for 5 minutes. After 5 minutes, plug the unit back in and operate as normal.
What to do if my Home Decorators SF122-26AI Indoor Fireplace has a visible flame effect, but the heater doesn't blow warm air?
If your Home Decorators Indoor Fireplace shows a flame effect but the heater isn't blowing warm air, first ensure that the temperature setting is higher than the current room temperature. Also, try turning the heater button on and off several times to ensure it is in the “ON” position.
Why my Home Decorators Indoor Fireplace main power switch lights up, but there is no flame effect?
If the main power switch of your Home Decorators Indoor Fireplace lights up, but there is no flame effect, open the top and back panels to check if the flame spindle has fallen off from the spindle motor.
Read all safety, operating, and maintenance information to avoid risks of fire, shock, or injury.
Keep this manual for future reference and follow all provided directions and warnings.
Covers warnings regarding no user-serviceable parts, hot surfaces, children, electrical hazards, and flammable areas.
Proper grounding is essential for safety. Ensure correct installation to reduce electric shock risk.
Equipment complies with FCC Rules Part 15 for digital devices and radio frequency energy.
Details the one-year warranty for defects in workmanship or materials.
Details unit voltage (120 VAC, 60 Hz) and power consumption (1500 Watts).
Lists included items: the fireplace unit and its remote control.
Explains the location, components, and indicators of the unit's main control panel.
Instructions on how to set the timer for automatic operation of flames and heater.
How to turn the heater on/off and adjust temperature settings (Fahrenheit/Celsius).
Details on adjusting flame height and log brightness levels.
Instructions for turning the fireplace/heater unit on and off using the main power button.
Guide to installing batteries in the remote and general battery replacement notes.
Explains how remote control buttons function and their correspondence to panel controls.
Guidance on cleaning the unit, including warnings about water and abrasive cleaners.
Addresses common problems like unit not turning on, no flame effect, or remote issues.
A comprehensive list of all available replacement parts with their corresponding part numbers.
General| Model Number | SF122-26AI |
|---|---|
| Color | Black |
| Voltage | 120V |
| Remote Control | Yes |
| Thermostat | Yes |
| Timer | Yes |
| Heating Area | 400 sq ft |
| Fuel Type | Electric |
| Product Type | Indoor Fireplace |
| Flame Effect | Yes |
| Fireplace Type | Freestanding |
To Next Page
