© 2020 Home Deputy. Home Deputy™ is a registered Trademark. All right reserved. Flag Pole Light Instructions
Dear Customer, thank you for purchasing the Home Deputy™ Flag Pole Light. Please read these
instructions for simple installation and use; and for how to register your extended warranty.
About the product:
Whilst other lights may look similar, we have spent a lot of time developing, fine-tuning and
testing our product to ensure this is the best performing solar-rechargeable flag pole light on
the market. The Home Deputy Flag Pole light comes with the following features, all designed for
‘set, forget and enjoy’ operation:
- Two brightness levels: I = 57 LEDs (for longer battery life); and II = 111 LEDs (for brighter
output)
- Auto turn on at night
- Auto recharging during the day (when turned ‘ON’)
- Lithium-Ion battery for additional useful capacity and faster charge times
Operating and Installation Instructions:
The light is designed for simple installation and use on a 15-25ft flag pole with a ½ inch diameter
rod/ornament on the top, and least 1 ½ inch of available thread. (Please note: If for any reason
it doesn’t fit your pole, please contact us at customersupport@home-deputy.com with a photo
of your pole top and ornament as we may be able to help!)
1. Remove plastic film on solar panels.
2. Press the ‘ON’ button (if you are unsure, please test at night or a dark room. The light
will automatically turn on in the dark);
3. Choose your preferred brightness level by pressing the I / II button (57 LEDs or 111 LEDs);
4. Unscrew the ornament from the top of your flag pole;
5. Fit the light and replace the ornament;
6. Raise your flagpole – the light will automatically turn on at night.
Figure 1: Example of correctly installed Flag Pole Light assembly.