Need help?Do you have a question about the Home Reserve Monroe Sofa and is the answer not in the manual?
General| Brand | Home Reserve |
|---|---|
| Model | Monroe Sofa |
| Category | Indoor Furnishing |
| Language | English |
Videos demonstrate applying fabric covers for a smooth, wrinkle-free finish.
Seat cushions are firm initially for longevity; break-in by walking on them.
Sanding pad included for smoothing edges after frame assembly; no glue is used.
Open parts bag, insert T-connectors into numbered wood parts; hammer can be used.
Attach black floor glides to the specified wooden frame parts.
Connect numbered parts (1-8) using T-connectors and attach part 9 without screws.
Attach parts 10 and 11 using screws, then attach part 12 with special-size screws.
Slide and secure parts 6, 8, 11, and attach parts 13, 14, 15 to the frame.
Slide parts 16, 17, 18 into slots, then slide part 19 onto parts 2 and 4.
Attach parts 20 and 21 to part 19 and part 8, then secure part 22 over part 19.
Slide parts 23, 24, 25 into back slots and parts 26, 27, 28 into front slots.
Position and secure parts 29, 30, 31, 32, and 33 to the frame structure.
Attach part 34 to the left end and parts 35, 36 as shown. Parts 37, 38 are for fabric assembly.
Fabric covers are inside out; unfold zippers. Snip hanging threads, which does not affect seam strength.
Attach top rails, arm panel covers to parts 32/33, and frame back cover to the sofa back.
Insert wood parts 37/38 into front cover sleeve and fasten velcro closures at front and back.
Cover arm foams with elite fabric, then insert into arm covers by aligning corners and smashing foam.
Match cushion foam and cover edges, align corners, smooth, and zip up seat cushions.
Fill back cushion covers, zip up, knead/smooth on floor, and place on frame.
To Next Page