12
HOW TO SELECT A WASH CYCLE
NOTE: (
) THIS MEANS YOU NEED TO FILL THE RINSE AID DISPENSER.
( ▲) THIS IS THE TEST CYCLE. THE RINSE AID DISPENSER LEVEL IS RECOMMENDED AT “3.”
How Do I Turn on the Dishwasher?
To start the wash cycle:
1. Pull out the basket. See “How Do I Load the Dishwasher?” for instructions.
2. Load detergent. See “How to Use Detergent” for instructions.
3. Plug in the dishwasher. The power supply is 120V/60Hz.
4. Check that the water supply is turned on to full pressure.
5. Push the basket in and close the dishwasher door. Press the power button to turn on.
6. Press the program button to select your wash cycle. The options are: heavy, normal, ECO, glass, speed, and rinse.
Refer to the wash cycle table for details.
7. Press the start/pause button to start the cycle.
Program Cycle Selection
Information
For the dirtiest dishes,
such as pots, pans,
casserole dishes or
anything that has had
food sitting on it for
a while.
For regular dishes used
on a daily basis, such as
pots, plates, glasses, and
lightly used pans.
For slightly dirty dishes,
such as glasses, crystal
For lightly used dishware
and glasses.
For lightly used dishes
that do not need drying.
For rinsing dishes,
glasses, or cutlery that
do not need washing.
Description
of Cycle
Pre-wash
Rinse
Drying
Pre-wash
Pre-wash
Rinse
Drying
Pre-Wash
Rinse
Rinse 140F (60C)
Drying
Pre-Wash
Rinse
Drying
Pre-wash
Rinse
Pre-wash
Main-wash
Detergent
pre/main
1 /
tablespoon
(18g)
1 /
tablespoon
(18g)
1 /
tablespoon
(18g)
1 tablespoon
(15g)
1 tablespoon
(15g)
Running time
(min)
100
110
75
70
45
24
Energy (KWH)
0.49
0.36
0.27
0.28
0.31
0.03
Water (l)
12.5
10.8
10
8.5
10.5
4.3
Rinse
Aid
NOTE: To pause the dishwasher while washing, press the start/pause button. The dishwasher will pause and
blink the program light. It will remain like this until you start it again.
Heavy
Normal
Glass
Speed
Rinse
ECO
WASH CYCLE TABLE
OPERATING INSTRUCTIONS
▲
To Next Page
Loading...
