Home HME030343N - Operating Instructions; Packing List; Installation and Assembly

10 11
PACKING LIST
IMAGE
PART
QUANTITY
Window Air Conditioner
1
Remote Control
1
Top Mounting Rail
(With sponge)
1
Filler Panels
(With “Left” & “Right” remark
on the front face)
2
Sash Lock
(Two holes)
1
Window Sash Seal
(Sponge)
1
5/16” Long Hex-head Screw
10
5/8” Long Hex-head Screw
4
1/2” Long Hex-head Screw
2
5/8” Long Flat Head Bolt and
Locknut
2
Sill Angel Bracket
2
1/2” Long Flat Head Bolt and
Locknut
4
Gasket
2
Foam Top Window Gasket
(Thin sponge for backup using)
1
Insulation strip (Sponge)
(Only for E-star model)
2
Support Bracket (with R and L
remark)
2
Battery
2
Operating Instructions Operating Instructions
WARNING
Avoid fire hazard or
electric shock. Do not use an extension cord
or an adaptor plug. Do not remove any prong
from the power cord.
Grounding type wall receptacle
Power supply cord
with 3-prong grounding
plug and current
detection device
Do not, under any
circumstances , cut,
remove, or bypass the
grounding prong.
INSTALLATION & ASSEMBLY INSTRUCTIONS
Window Preparation
Please read all instructions prior to installing your air conditioner. Two people are recommended to install
this product. If a new electrical outlet is required, have the outlet installed by a qualied electrician before
installing the unit.
Before installing the unit, check the dimensions of your window to make sure the air conditioner will t.
This unit is made to t inside a standard double-hung window. Make sure the window is in good shape
and able to rmly hold the needed screws. If not, make repairs prior to installing the unit.
Model 15K
Unit Height (inches) 17.91
Unit Width (inches) 23.625
Min. Window Opening
(See FIG l) (inches)
19.00
Min. Window Width (inches) 28.00
Max Window Width (inches) 41.00