Homebase FDP35-2010ZPR5

Need help?

Do you have a question about the Homebase FDP35-2010ZPR5 and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

This document describes the Homebase Portable Air Conditioner 12000BTU, an instruction manual for a portable air conditioning unit.

Function Description

The Homebase Portable Air Conditioner is designed to provide cooling, dehumidification, and fan functions. It has a cooling capacity of 12000 BTU/H, making it suitable for maintaining a comfortable temperature in a room. The unit is equipped with a control panel and a remote control for convenient operation. It features various modes including Auto, Cool, Fan, and Dehumidify, allowing users to select the desired function based on their needs. The appliance also includes a timer function for scheduled operation and a sleep mode for quiet, energy-efficient use during the night.

Important Technical Specifications

Cooling Capacity: 12000 BTU/H
Model No.: FDP35-2010ZPR5
Article No.: 647448
Voltage: 220 - 240V
Frequency: 50Hz
Rated Input Power: 1250W
Rated Input Current: 5.6A
Temp. Setting Range: 15°C-31°C
Refrigerant: R290/160g (This appliance contains R290 refrigerant gas, which is a flammable refrigerant. It is important to handle with care and ensure proper ventilation during installation and maintenance.)
Noise Level: Less than 63dB(A)
Net Weight: 26.4Kg
Product Dimensions (mm): H700 x W355 x D350
Fuses: 250V AC, 13A

The appliance is designed to conform to relevant directives of The European Community and complies with applicable UK directives. It is marked for proper disposal of household waste to prevent harm to the environment or human health, encouraging recycling and sustainable reuse of materials.

Usage Features

The air conditioner can be operated via its control panel or the included remote control.

Control Panel and Indicators: The control panel features buttons for:

Power (on/off)
Swing (to adjust airflow direction)
Fan Speed (low/middle/high)
Timer (to set operation duration)
Temperature adjustment (+/-)
Mode selection (Sleep, Mode, On/Off)

Indicators include:

On/Off status
Temperature display (in °C or °F)
Fan speed (low/middle/high)
Water tank full
Cool mode
Dehumidification mode

Remote Control: The remote control provides access to the same functions as the control panel, including:

Power button
Swing button
Temperature/timer increasing button
Mode button
Temperature/timer decreasing button
Fan speed button
Timer button
Sleep button

Operating Modes:

Auto Mode: The unit automatically selects the desired operation mode (Cool or Fan) based on the room temperature.
- If room temperature is ≥24°C, the unit automatically selects Cool mode.
- If room temperature is <24°C, the unit automatically selects Fan mode.
Cool Mode: The unit operates to cool the room. The compressor starts to run when the room temperature is higher than the set temperature and stops when it is lower.
Dehumidify Mode: The fan runs at a low speed, and the speed cannot be adjusted. The unit adapts constant temperature in dehumidifying mode, and the adjustment of temperature is not effective.
Fan Mode: The fan runs at set speed, and the compressor does not run. Temperature adjustment is unavailable.
Adjusting Temperature: The temperature can be adjusted from 15°C to 31°C, in 1°C increments, using the [+] or [—] buttons.
Adjusting Fan Speed: The fan speed can be set to low, middle, or high using the fan speed button.
Setting the Timer: The timer allows for automatic switch-on or switch-off after a predetermined amount of time (1 to 24 hours). If no other buttons are pressed, the timer will automatically confirm, and the indicator will remain illuminated steadily.
Sleep Mode: This mode is effective when the unit is under "cool" mode. The unit will work under sleep mode, and the centrifugal fan will turn to low speed automatically. The set temperature will increase 1°C after one hour and an additional 2°C after two hours. The unit will stop running after six hours.

Installation: The unit requires installation of a window kit and an exhaust hose to vent hot air outside. The window kit is designed for most standard horizontal and vertical window applications. The window height should not be less than 60 cm or greater than 120 cm. The exhaust hose should be extended and positioned in a way that it can reach the window, door, or venting hole in the wall. It is important not to block the air intake with a protective grid or any other object.

Maintenance Features

Safety Warnings (General):

Read the instruction manual carefully before installation or use.
Always follow basic precautions when using electrical appliances to reduce the risk of fire, electric shock, burns, and other injuries.
The appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons.
Do not use the unit in an area where oil is likely to splash, exposed to direct sunlight, or where water is likely to splash.
Never insert fingers into the air outlet.
Keep the unit upright while transporting and storing.
Before cleaning or moving the appliance, always turn off and disconnect the power supply.
All air-conditioner sockets must comply with local electric safety requirements.
The appliance shall be installed in accordance with national wiring regulations.
Do not pull, deform, or modify the power supply cord.
Servicing shall only be performed as recommended by the equipment manufacturer.
Maintenance and repair requiring the assistance of other skilled personnel shall be carried out under the supervision of the person competent in the use of flammable refrigerants.
Do not stop the unit by pulling the plug from the power supply.
Turn off and unplug the unit if strange sounds, smells, or smoke come from it.
Always plug the appliance into an earthed plug socket.
Do not use means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer.
The appliance shall be stored in a room without continuously operating ignition sources (e.g., open flames, an operating gas appliance, or an operating electric heater).
Be aware that refrigerants may be odourless.
This appliance contains R290 refrigerant gas. R290 is a refrigerant gas that complies with the European directives on the environment. Do not puncture any part of the refrigerant circuit.
Repairs must be performed based on the recommendation from the manufacturer.
Regarding the instructions for symbols displayed on unit, please refer to page 5.
Always let the appliance rest for at least 2 hours after moving it from one location to another.

Safety Relating to Refrigerant R290:

Caution, risk of fire: This symbol indicates that the appliance uses a flammable refrigerant. If the refrigerant leaks and is exposed to an external ignition source, there is a risk of fire.
Operation manual: This symbol indicates that the operation manual should be read carefully.
Installation manual: This symbol indicates that personnel handling this equipment should refer to the installation manual.
Information: This symbol indicates that information is available, such as the operating instructions or installation manual.

Warning: Keep ventilation openings clear of obstruction.

The appliance should be stored in a well-ventilated area, where the room size corresponds to the room area, as specified for operation. The required distance around the unit should be at least 30cm.
This appliance should be installed, operated, and stored in a room with a floor area larger than 4m².

Water Full Alarm: The unit has a condensation water collection system. When the water level in the drip tray is too full, the "water full" indicator light will switch on, and after 5 minutes, the error code [E4] will appear on the screen. To resolve this:

Unplug the unit from the power supply.
Place a pan under the water drainage outlet at the bottom of the unit.
Remove the rubber stopper and drain all water out of the tray.
Alternatively, attach a water drain hose to the drainage outlet and lead the hose to the outside or into a tub or drain for water drainage.

Protection: The protective device may be activated in the following cases:

Cooling: Room temperature is above 43°C or below 15°C.
Dehumidifying: Room temperature is below 15°C. If these circumstances occur, the unit will switch off.

NOTE: If the air conditioner is operating in cooling or dehumidifying mode with adoor or window open, when room relative humidity is above 80%, water mist may blow out of the outlet.

Troubleshooting Guide: The manual provides a troubleshooting guide for common issues:

Does not run: Over protector or fuse is blown, power is not properly plugged in, battery in remote control is exhausted, or the protector is preventing unit from working.
Runs for a short while only: Set temperature is close to room temperature, or air outlet is blocked by an obstacle.
Water leak when moving: Didn't drain the water before moving, or the unit is on un-flat ground.
Does not run and water full indicator is illuminated: Pull out the rubber plug to drain water.
Appliance automatically stops: Timing shut down, or set temperature reached.

Plug Replacement: Instructions are provided for replacing the fitted plug, including wiring details for Blue (Neutral) and Brown (Live) wires. It emphasizes using a BS 1363 13 Amp fuse and consulting a qualified electrician if in doubt.

Warranty: The product is covered by a 2-year warranty. The warranty covers any manufacturing defect in materials, workmanship, and finish. Claims can be made at the nearest Homebase store with proof of purchase within 2 years. The warranty is given by HHGL Limited, MK9 1BA; HHGL (ROI) Limited, D02 X576. The warranty does not apply to products misused or neglected and only covers domestic use, not commercial use.