TROUBLESHOOTING
Problem Possible Cause Solution
Burner will not light using
the ignition system
LPG cylinder is empty Replace with full cylinder
Faulty regulator Have regulator checked or replaced
Obstructions in burner Clean burner
Obstructions in gas jets or gas hose Clean jets and gas hose
Electrode wire is loose or disconnected on
electrode or ignition unit
Reconnect wire
Electrode or wire is damaged Change electrode and wire
Faulty push button igniter Change igniter
Burner will not light
with a match
LPG cylinder is empty Replace with full cylinder
Faulty regulator Have regulator checked or replace
Obstructions in burner Clean burner
Obstructions in gas jets or gas hose Clean jets and gas hose
Low flame or flashback (fire
in burner tube - a hissing or
roaring noise may be heard)
LPG cylinder too small Use larger cylinder
Obstructions in burner Clean burner
Obstructions in gas jets or gas hose Clean jets and gas hose
Windy conditions Use BBQ in a more sheltered position
Gas valve knob difficult to
turn
Gas valve jammed Replace gas valve
To Next Page
Loading...
