ENGLISH
11
LIGHT REPLACEMENT
• Switch o the extractor hood and isolate the extractor hood by
pulling out the mains plug or switching o the fuse.
• Remove the grease lter.
• Replace the lamp (commercially) led modules, separate ballast.
• Reconnect the power by inserting the mains plug or by switching on the fuse.
MAX POWER VOLTAGE LAMP CAP ILCOS D CODE
Filament
lamp
40 Watts 110-127V E14 IBT-40-110/127-E14-25/58
Filament
lamp
40 Watts 220-240V E14 IBT-40-220/240-E14-25/58
Halogen
lamp
28 Watts 220-240V E14 HSG-28-220/240-E14-37
LED
module
3 Watts 110-240V E14 DBL-3-H-E14-35
LED
modules,
separate
ballast
1.5 Watts 120V DSH-1.5-S-33.2/120
HOW TO OPERATE
The range hood over your stove is there to remove smoke, vapors, heat, and cooking odors.
• Turn the fan on a few minutes before you start cooking. Choose
between three speed options (LOW, MEDIUM & HIGH).
• If you need light, press the ON/OFF switch on the control
panel to turn on the dual LED lights.
• Start cooking.
• Once nished, leave it running for 15 minutes and then turn o.
To Next Page
Loading...