Why won't my Homecrest CF-12 light?
Your Homecrest Indoor Fireplace might not light due to a couple of reasons. First, check if your LP (propane) tank is empty or if the natural gas isn't turned on. Refill the tank or check the natural gas valve. Another possibility is a plugged burner orifice. Inspect it for any blockages and remove them.
What to do if Homecrest Indoor Fireplace flames are low or won't stay lit?
If the flames are low or won't stay lit on your Homecrest Indoor Fireplace, it might be due to the manual shut-off valve (on/off control knob) being open or not installed between the LP tank and the appliance. You should close both the LP tank and manual shut-off valves. Then, open the LP tank valve first, and then the manual shut-off valve.
Why does my Homecrest Indoor Fireplace have blue flames?
Blue flames in your Homecrest Indoor Fireplace might be due to an improper air/fuel mixture related to the air shutter position. Try closing the air shutter. For LP, leave it 1/4" open; for natural gas, adjust to be closed.
General| Brand | Homecrest |
|---|---|
| Model | CF-12 |
| Category | Indoor Fireplace |
| Language | English |
Guidance on assembling the burner, including hose and regulator connections.
Procedures for connecting the gas supply line according to codes and standards.
Specific instructions for connecting and handling LP gas cylinders.
Step-by-step instructions for lighting the fire table and operating it safely.
To Next Page