HoMedics PERFECTSTEAM PS-HH50 User Manual

INSTRUCTION MANUAL AND WARRANTY INFORMATION
PS-HH50
1-YEAR LIMITED WARRANTY
www.homedics.com/register
Your valuable input regarding this
product will help us create the
products you will want in the future.
PLEASE TAKE A
MOMENT NOW
REGISTER YOUR PRODUCT AT:

HoMedics PERFECTSTEAM PS-HH50 Specifications

General

Brand	HoMedics
Model	PERFECTSTEAM PS-HH50
Category	Steam Cleaner
Language	English

Summary

Important Safety Instructions

DANGER: Risk of Electric Shock

Essential safety precautions to prevent electric shock during use and cleaning of the appliance.

WARNING: Risk of Burns, Fire, Electric Shock, Injury

Crucial warnings for safe operation, covering burns, fire hazards, and personal injury risks.

General Use Precautions

Guidelines on proper usage, avoiding attachments, and handling hot parts to prevent injury.

Unique Features and Specifications

Turbo Steam Technology

Powerful steam for wrinkles and freshening garments.

Quick Heat Up

Appliance is ready for use within 40 seconds.

Two Settings for All Fabric Types

Offers regular and turbo steam modes for different fabric needs.

Auto-Off Function

Automatically shuts off after 8 minutes of idle time.

Self-Cleaning Mode Notification

Notifies user to clean via a flashing blue LED after 5 hours of use.

Runtime

Provides up to 15 minutes of continuous steam from a full water tank.

Built-in Crease Attachment

Accessory designed to create sharp creases in garments.

Filling with Water

Remove Water Tank

Press the water tank latch to detach the water tank from the unit.

Open Water Inlet Stopper

Access the water filling port by opening the stopper.

Fill Water Tank with Distilled Water

Use the water cup to fill the tank, recommending distilled water for mineral deposit reduction.

Reattach Water Tank

Close the inlet stopper and secure the water tank back into the steamer.

Prior to Use

Attach 2-in-1 Attachment

Connect the attachment for better steam penetration and fabric smoothing.

Plug into Electrical Outlet

Connect the appliance to a standard 120-volt electrical outlet.

Press Power Button for Heat-Up

Activate the unit; the steam button flashes green during heat-up.

How to Use

Hang Garment on Plastic Hanger

Hang clothes on a suitable hanger, cautioning against door damage from steam.

Select Steam Setting

Press the steam setting button to choose regular (blue) or turbo (red) steam.

Steam Garment from Top to Bottom

Move the steamer continuously from top to bottom, avoiding prolonged contact with fabric.

Using the Crease Attachment

Open Crease Attachment

Press the back of the attachment to open it for garment placement.

Slide Garment Under Clip

Position the garment under the clip and release it.

Create Crease with Steam

Press steam setting and slide steamer along the garment edge to form a crease.

After Use

Turn Off and Unplug

Press steam setting to standby, then power button to off, and unplug the unit.

Empty Water Tank

Remove any remaining water and reattach the tank.

Allow to Cool Before Storing

Wait for the garment steamer to cool down completely before storing it.

Cleaning and Care

Self-Cleaning Mode

Instructions for activating and performing the self-cleaning cycle, indicated by a blue LED.

Cleaning the Garment Steamer Exterior

Clean the outside of the appliance with a soft, damp cloth as needed.

Troubleshooting

No Power Issues

Solutions for when the unit does not turn on or receive power.

Not Heating Issues

Troubleshooting steps for when the appliance fails to heat up.

Little or No Steam

Addresses issues with low steam output or no steam, including settings and cleaning.

FCC and IC Statements

1-Year Limited Warranty

Warranty Coverage and Service

Details on warranty period, how to obtain service, and what is covered.

Warranty Exclusions

Lists conditions and damages not covered by the limited warranty.

Contacting HoMedics for Service

Provides contact information (email, phone) for warranty service in the USA and Canada.