This engine uses an NGK BPMR6A or Champion RCJ6Y spark plug with 0.60 (+/- 0.1)mm
electrode gap. Use an exact replacement and replace annually. Make sure new spark plug
is secured in place with a torque up to 12N.m.
airbox cover by turning the airbox lock knob counter clockwise.
, air filter retainer and the foam filter element.
the airbox lock knob to secure.
CLEANING THE EXHAUST PORT AND MUFFLER
Depending on the type of fuel used, the type and amount of oil used, and/or your operating
conditions, the exhaust port and muffler may become blocked with carbon deposits. If you
notice a power loss with your petrol powered tool, a qualified service technician will need to
remove these deposits to restore performance.
To Next Page
Loading...
Need help?
General
