Need help?Do you have a question about the Homelite UT10946 and is the answer not in the manual?
General| Engine Type | Gasoline |
|---|---|
| Oil Tank Capacity | 6.8 oz |
| Bar Length | 16 in |
| Chain Pitch | 0.325 inches |
| Chain Gauge | 0.050 inches |
| Engine | 2-stroke |
Lists and identifies all parts of the chain saw with corresponding numbers.
Outlines legal requirements for mufflers and spark arrestors in various regions.
Details the dangerous kickback reaction and necessary safety measures to prevent injury.
Covers essential safety measures for operating the chain saw, including grip and posture.
Details required clothing, footwear, and gloves for safe operation and protection.
Explains what rotational kickback is, its causes, and potential dangers.
Provides instructions and critical safety warnings for refueling the saw.
Explains the function of key safety features like the SAFE-T-TIP® guard.
Details the SAFE-T-TIP® guard, its function in preventing kickback, and installation.
Explains low kickback chains, their specifications, and maintenance considerations.
Discusses guide bars with small radius tips and their impact on kickback potential.
Explains the function, operation, and daily checks of the chain brake.
Provides instructions and safety precautions for fueling the saw with the correct fuel mix.
Explains the lubrication system for the bar and chain, including oil type and ratio.
Provides step-by-step instructions for safely starting the engine.
Details how to safely stop the engine, including for normal and emergency stops.
Outlines essential steps and safety measures to take before cutting operations.
Explains the correct way to grip the saw handles for safety and control.
Describes the correct body posture and footing for safe and effective cutting.
Guides the user through fundamental cutting techniques for basic operations.
Details safety measures for the cutting area, including clearing obstructions and maintaining distance.
Explains how to adjust the carburetor, including factory settings and warnings.
Provides instructions for adjusting the idle speed of the engine and troubleshooting low idle issues.
Details how to operate, check, and maintain the chain brake mechanism.
Covers critical safety precautions and procedures for felling trees.
Highlights dangerous conditions during tree felling, such as high winds or lean.
Explains how to safely remove buttress roots before felling a tree.
Defines bucking, provides initial safety instructions, and handling small logs.
Details how to use a wedge during bucking to prevent pinching and aid cutting.
Advises on handling logs under tension to prevent pinching and ensure safe cutting.
Explains how to perform overbucking cuts, starting from the top of the log.
Explains how to perform underbucking cuts, starting from the bottom of the log.
Guides on safely removing branches from a tree, emphasizing proper grip and stance.
Warns about dangerous springpoles and how to handle them to prevent injury.
Provides a schedule for routine maintenance tasks based on usage intervals.
Explains how to correctly assemble the guide bar and chain onto the saw.
Details how to check and adjust chain tension for proper operation and safety.
Explains how to maintain the saw chain for optimal performance, including cleaning.
Specifies the correct angle for filing the top plate of the cutter for optimal cutting.
Provides detailed step-by-step instructions on sharpening the saw chain cutters.
Explains the correct side plate angles for filing cutters to prevent kickback.
Details how to adjust and check the depth gauge clearance for proper cutting.
Explains how to maintain the guide bar, including cleaning, reversing, and lubrication.
Instructions for maintaining the SAFE-T-TIP® nose guard and checking its mounting screw.
Explains how to clean and maintain the air filter for proper engine operation.
Instructions for cleaning the starter unit's cooling vents to ensure proper function.
How to clean engine fins and flywheel fins to prevent overheating.
Instructions for checking and replacing the fuel filter if contaminated or damaged.
Details about the spark plug, its specifications, and replacement intervals.
How to clean and maintain the spark arresting muffler to prevent fire hazards.
Explains how to clean and check the chain brake mechanism after servicing.
Lists recommended bar and chain part numbers and descriptions for optimal performance.
Guides on how to use the chart to diagnose and solve common operational problems.
Provides instructions for storing the saw for extended periods to prevent fuel system issues.
Lists engine displacement, bore, stroke, and general specifications.
Details idle speed, wide-open throttle (WOT) speed, and power output.
Provides data on carburetor, air filter, fuel tank, oil tank, and chain lubrication.
Specifies spark plug type and gap for the ignition system.
How to get warranty service from Homelite dealers and contact information.
Details the warranty period and coverage for the engine and its parts.
Outlines the owner's duties for maintaining warranty coverage and preventing denial.
Lists exclusions and limitations of the warranty, including misuse and neglect.
Schedule and parts for emissions system maintenance and warranty compliance.
To Next Page